HP Integrity Superdome 2 16-socket HP Superdome 2 Partitioning Administrator G - Page 60
Task Summaries for Rebooting and Resetting Partitions, Table 6, Table 6
View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
M 003 Mac(002655A9CA32) PcieRoot(0x3)/Pci(0x2,0x0)/Pci(0x0,0x0)/MAC(002655A9CA32,0x0) 004 Mac(002655A9CA36) PcieRoot(0x3)/Pci(0x2,0x0)/Pci(0x0,0x1)/MAC(002655A9CA36,0x0) nl nl nl nl nl nl nl nl nl nl nl Task Summaries for Rebooting and Resetting Partitions Table 6 describes the main nPartition boot and reset tasks and provides brief summaries and references for detailed procedures. You can perform the nPartition boot tasks in Table 6 (page 60) using either the OA CLI or the OA GUI. Table 6 nPartition Boot and Reset Task Summaries Task POWERON (pe)1 Summary Boots the partition. See "POWERON PARTITION" (page 64). POWEROFF (pe) Shuts down the partition. See "POWEROFF PARTITION" (page 61). REBOOT (rs) Reboots the OS on the specified nPartition or virtual partition. See "REBOOT PARTITION" (page 64). SET PARTITION DVD Connect or disconnect the DVD module to the specified partition. See "SET PARTITION DVD" (page 65). TOC (tc) Performs a transfer-of-control reset of the specified nPartition or virtual partition. See "Force System Reset and Crash Dump (TOC) PARTITION" (page 69). UPDATE SHOW Displays information about the TRAY, LCD, FAN and so on. See "UPDATE SHOW NPARTITION" (page 72). SHOW PARTITION DVD Displays information about the DVD drive attached to the specified partition. See "SHOW PARTITION DVD" (page 67). SHOW PARTITION INFO Displays information about the specified partition(s). See "SHOW PARTITION INFO" (page 69). UPDATE NPARTITION The UPDATE NPARTITION command downloads a new flash image from the network or a USB drive attached to the DVD module, or a DVD in the enclosure DVD drive in the monarch enclosure and uses it to update the firmware for HP Superdome 2 cell blades within the specified partitions. See"UPDATE NPARTITION" (page 70). UPDATE SHOW NPARTITION Displays the version of the firmware bundle currently installed on the server blades within the specified partitions. See "UPDATE SHOW NPARTITION" (page 72). UPDATE FIRMWARE Updates the Superdome system's firmware (except I/O firmware). See "UPDATE FIRMWARE" (page 72). UPDATE SHOW FIRMWARE Displays the configured Superdome firmware version and lists any of the following Superdome 2 devices whose installed firmware version differs from the system's configured firmware version: blade, XFM, SIOX, OA, GPSM. See "UPDATE SHOW NPARTITION" (page 72). 1 When any of the 2-letter equivalents for POWERON/POWEROFF/TOC/REBOOT (namely, pe, tc, and rs respectively) are executed without any arguments, a list of available partitions on which the command may be excercised are displayed. 60 Booting and resetting Partitions (nPartitions and vPars)