HP Integrity Superdome 2 8/16 LIFT-O-FLEX® 17000 SP 400 Manual - Page 9
Handlebar, Lifting, Transport
View all HP Integrity Superdome 2 8/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Lift-O-Flex 17000 SP 400 Manual 3.1.2 Handlebar The height of the handlebar can easily be adjusted by loosening the quick disconnect handles and sliding the handlebar to the desired position. After adjustment, tighten the quick disconnect handles. To obtain the best working conditions it is important to adjust the handle to a comfortable level. During movement of the lifter, always keep hands inside the handle. This will protect the hands if the handlebar should encounter an obstacle. 3.1.3 Lifting Important! The maximum lift capacity is limited to 400lb. The lifter is not to be used for personnel transportation. Place your LIFT-O-FLEX in the working area. Make sure to always apply the brake before loading or unloading the end-effector. To apply the brakes, push the red brake bar forward to its bottom position. Be certain that the end-effector is placed on the same level as the object being loaded. To adjust the elevation of the end-effector, use the buttons on the remote control pendant. The remote control pendant has arrows to show the direction of operation. Place the load on the end-effector. The load should always be positioned centrally in order to obtain the best stability possible. The load should be placed at the center and back of the end-effector. When loading different items raise/lower the end-effector to the correct elevation, making it easy to push or pull the items on or off the end-effector. The remote control pendant can rest on the handle or be held in the hand in the best position to observe the movement of the end-effector. The remote control holder with keyhole slot is mounted on the handlebar and can be easily adjusted. Turn the quick release handle loosening the holder, adjust to the desired angle or position and retighten the quick release handle to lock it in place. 3.1.4 Transport The end-effector should always to be lowered to the lowest possible position before moving the lifter. Unlock the central brake by positioning the red bar in the middle position. All four wheels can now swivel in any direction. Page 8 Rev July 01