HP Integrity cx2600 HP Server Mount Kit AB292A for 19 in. 2-Post Rack Installa - Page 3
HP Server Mount Kit for 19 in. 2-Post Rack Installation Instructions, Introduction
View all HP Integrity cx2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
1 HP Server Mount Kit for 19 in. 2-Post Rack Installation Instructions Introduction This manual provides instructions for installation of the hp Integrity cx2600 server chassis in a 19 in. 2-column rack, with column widths of 3 to 9 inches. Cabinet Safety Precautions WARNING Ensure that the rack is level and stable before working on the rack. Be sure the leveling jacks (feet) extend to the floor and that the full weight of the rack rests firmly on the floor. WARNING Ensure that the rack has anti-tip measures in place. Such measures may include floor-bolting, anti-tip feet, ballast, or a combination of these measures as specified by the rack manufacturer and applicable codes. WARNING Be sure that adequate personnel are on hand to support the product(s) during the installation process. Use of the appropriate lifting device is recommended as an installation aid. WARNING Always load the rack from the bottom up. Load the heaviest items in the rack first. This makes the rack bottom-heavy and helps prevent the rack from becoming unstable. WARNING Do not overload the branch circuit that provides power to the rack. The total rack load should not exceed 80% of the branch circuit rating. Mounting Kit Contents This manual provides installation instructions for server mount kit AB292A. This kit is intended for use with the hp Integrity cx2600 server, and includes the following: • Chassis Tray (Base) • Two Rack Brackets • Cable Management Strain Relief Bar • Mounting Hardware (screws, washers, and nuts) Chapter 1 3