HP Integrity rx1600 Read Me First: Replacing the Base Unit - Page 2

Step 1. Remove the following components from your existing base unit. Refer to sections of the Operation and Maintenance Guide, included on the hp Server Documentation CD-ROM for component removal instructions. Table 1 List of Components to be Removed • Power Supply Fans • Chassis Fans • Power Supply • PCI I/O Backplane Assembly • CPU airflow guide (single CPU systems only) • Memory DIMMs • CPU(s) and associated Power Pods • DVD or CD-ROM (if present) • DVD Filler (present when a DVD or CD-ROM is not installed) • Disk Filler(s) (present on disk-less systems) • Disk(s) • Display Panel • Management Processor card (optional card, may be present) • Management Processor Blank (present when Management Processor not installed) Step 2. Install the previously removed components into the new base unit. Refer to sections of the Operation and Maintenance Guide, included on the hp Server Documentation CD-ROM for component replacement instructions. Table 2 List of Components to be Replaced • Power Supply Fans • Chassis Fans • Power Supply • PCI I/O Backplane Assembly • CPU airflow guide (single CPU systems only) • Memory DIMMs • CPU(s) and associated Power Pods • DVD or CD-ROM (if present) • DVD Filler (present when a DVD or CD-ROM • Disk(s) is not installed) • Disk Filler(s) (present on disk-less systems) • Display Panel • Management Processor card (optional card, may be present) • Management Processor Blank (present when Management Processor not installed) Step 3. You will have to reconfigure the system boot settings at EFI. Step 4. Follow the instructions that accompany the new base unit to return the hardware to Hewlett-Packard. 2