HP Integrity rx1600 Site Preparation Guide, Second Edition - HP Integrity rx16 - Page 34
Conversion Factors and Formulas
View all HP Integrity rx1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
General Site Preparation Guidelines Conversion Factors and Formulas • Cabinets for cleaning materials • Maintenance area and spare parts Floor Plan Grid A floor plan grid is used to plan the location of equipment in the computer room. In addition to its use for planning, the floor plan grid should also be used when planning the locations of the following items: • Air conditioning vents • Lighting fixtures • Utility outlets • Doors • Access areas for power wiring and air conditioning filters • Equipment cable routing Conversion Factors and Formulas The conversion factors provided here are intended to ease data calculation for systems that do not conform specifically to the configurations listed in this Site Preparation Guide. Listed below are the conversion factors used in this document, as well as additional conversion factors which may be helpful in determining those factors required for site planning. Conversion Factors • Refrigeration - 1 watt =.86 kcal/h - 1 watt = 3.412 Btu/h - 1 watt = 2.843 x 10-4 tons - 1 ton = 200 Btu/min. - 1 ton = 12,000 Btu/h - 1 ton = 3,517.2 W • Metric Equivalents - 1 centimeter = 0.3937 in - 1 meter = 3.28 ft. - 1 meter = 1.09 yds - 1 in. = 2.54 cm - 1 ft. = 0.305 m - 1 CFM = 1.7m3/h • kVA Conversions 34 Chapter 3