HP Integrity rx1620 HP Integrity Servers with Microsoft Windows Server 2003 Re - Page 30
Issue, Servers, Workaround
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
#919385 from the HP Smart Update media. Hyper-threading can then be re-enabled. Component times outs cause installation failure Issue Servers Workaround If a Smart Component takes longer than 15 minutes to install, the installation of the Support Pack most likely fails. This normally occurs in cases where the system has many cards, such as numerous NIC cards, installed. All Integrity Install the Smart Component separately, and then install the Support Pack. Screen is blank at system startup Issue Servers Workaround During system startup the screen may remain blank for 3 to 8 minutes (actual time depends on the quantity of the installed system memory). All Integrity This is normal. The system activity can be monitored within a few seconds of system power-on using a remote terminal. Use of 16 GB option discouraged Issue Servers Workaround If you use the 16 GB option during installation of the operating system from reinstall media, you cannot create a kernel memory dump (in the event of a system failure) unless the page file size is manually configured afterward. In addition, even with manual configuration the page file size will still be less than the recommended 20 GB. All Integrity The system partition must be created on a 33 GB or larger disk drive. When using reinstall media, select either the 33 GB or maximum drive size option when configuring the system volume. Maximum Payload Size parameter must be off Issue Servers Workaround HP Integrity servers based on the HP ZX2 chipset using PCIexpress backplanes allow the user to control a feature called Maximum Payload Size (MPS). This feature must be off for Windows Server 2003, and is delivered off on factory-installed system. If the server is ever used with another operating system, ensure that the MPS setting is off before installing Windows Server 2003. rx6600, rx3600, rx2660, HP Integrity BL860c Server Blade, HP Integrity BL870c Server Blade Use the ioconfig in EFI to view and configure this value. To view the value, enter: shell>ioconfig To turn the value off (required on Windows Server 2003), enter: shell>shell> ioconfig mps_optimize off To turn the value on, enter: shell>shell> ioconfig mps_optimize on Use Esc+8 instead of F8 key on headless server Issue The Telnet and Hyperterminal applications on Windows NT4 and Windows 2000 do not correctly map the ASCII string for the function keys. For example, during Power On Self Test (POST) the Smart Array firmware displays a banner and configuration menu with instructions to press the Esc key to continue or 30 Release 5.5 Overview