HP Integrity rx1620 Installation Guide, Second Edition - HP Integrity rx1620 - Page 13
Unpacking the Server, Installing the Server into a Rack
View all HP Integrity rx1620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Server Overview and Unpacking Unpacking the Server Unpacking the Server Hewlett-Packard shipping containers protect their contents under normal shipping conditions. After the equipment arrives, carefully inspect each carton for signs of shipping damage. A tilt indicator is installed on each carton shipped. The beads in the indicator will roll to the upper position if the container has been tilted to an angle that could cause equipment damage. The tilt indicator itself will have two windows and each window under normal conditions will show four beads present. If a carton has been mishandled, accidentally dropped, or knocked against something, the tilt indicator will indicate missing beads. If damage is found, document the damage with photographs and contact the transport carrier immediately. If the equipment has any damage, a damage claim form must be obtained by the customer from the shipping representative. The customer should complete the form and return it to the shipping representative. Installing the Server into a Rack HP Rack Any hp Integrity rx1620 Server that is to be installed into a rack is shipped with equipment slides. With every set of slides comes an installation guide: Installation Guide, Mid-Weight Slide Kit, 5065-7291. Follow the steps in this installation guide to determine where and how to place the server into the rack. Non-HP Rack There is a guide for evaluating the installation of HP equipment in non-HP racks. This document should be utilized when there is a need to evaluate and qualify whether any HP equipment can be installed, maintained, and serviced in a non-HP rack. The guide is located on the Web at http://www.hp.com/racksolutions. Once there, select "mounting information" from the menu on the left side, then select the guide titled mounting in non-HP racks . Chapter 2 13