HP Integrity rx2800 rx2800 i2 Site Prep Guide - Page 4
Server Specifications, System configuration, Dimensions and weight, HP Generalized Site Preparation
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
1 Server Specifications This chapter provides the specifications for the server. For information on general computer room site preparation, see the HP Generalized Site Preparation Guide on the HP website at: http://www.hp.com/go/Integrity_Servers-docs System configuration Table 2 Hardware specifications for the server Component CPUs Memory Server One or two Itanium dual or quad-core CPUs: • 1.6-GHz Dual-core CPU 10-MB cache • 1.46-GHz Quad-core CPU 16-MB cache • 1.73-GHz Quad-core CPU 20-MB cache Supports up to twenty-four Double Data Rate 3 (DDR3) DIMMs mounted on risers that attach to the system board. Supported DIMM sizes are as follows: • 2 GB • 4 GB • 8 GB (future release) • 16 GB (future release) Minimum memory configuration is 4 GB (2 x 2-GB DIMMs). Maximum memory configuration is 96 GB (24 x 4 GB DIMMs).1 Disk drives PCI slots One to eight hot plug SAS hard drives. I/O riser options: • one full height full length PCIe x8 and two low profile PCIe x4 slots • one full height full length PCIe x8 and one low profile PCIe x8 slots SAS core I/O LAN core I/O Eight port SAS core I/O card or eight port SAS core I/O card with internal RAID. Four GigE LAN ports. Management core I/O One serial port, four USB 2.0 ports, one 1G/100/10 LAN port, and twol VGA ports. Optical drive One SATA DVD+RW drive. Power supply One 800 watt (@120 V ac) or 1200 watt (@240 V ac) power supply, 1+1 redundancy with the second power supply. IMPORTANT: 800 W redundancy does not apply to all configurations. 1 384 GB (24 x 16 GB DIMMs) future release Dimensions and weight Table 3 Rack or pedestal-mounted server dimensions Dimensions and weight Data Center Server Dimensions Depth 68.8 cm (27.1 in) Value 4 Server Specifications