HP Integrity rx7620 Installation (Smart Setup) Guide, Windows Server 2008, v6. - Page 55
Enable and Run Remote Desktop Connection, Verify System Device Drivers and Register for Updates
View all HP Integrity rx7620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Enable and Run Remote Desktop Connection The remote administration mode is enabled by default on Windows Server 2008 if you use the HP Reinstall media. If you install or reinstall using Microsoft OS media (for example, if you have a volume license from Microsoft), Remote Desktop functionality is disabled. Users must have unique user names. Windows does not permit two users with the same name to log on simultaneously. To enable remote desktop connections from a GUI console, complete the following steps: 1. From the Windows Desktop, select Start > Server Manager. 2. In the Server Summary section, click Configure Remote Desktop. 3. On the Remote tab, select the desired RDC connection option and assign user access rights as needed. 4. Click Apply and then OK to apply the changes. To enable remote desktop connections from a headless server, complete the following steps: 1. Go to the SAC console. 2. Log in as Administrator. 3. At the SAC> prompt, enter cmd. 4. Press Esc+Tab to enter the Command Prompt console. 5. Enter the following command from the Windows command prompt: reg add "HKLM\System\CurrentControlSet\Control\Terminal Server" /v fDenyTSConnections /t REG_DWORD /d 0 /f 6. If your installation uses media supplied by Microsoft, enable Remote Desktop traffic through the default Windows Firewall settings at the C:\Windows\system32> prompt by entering the following command: netsh firewall set service remotedesktop enable all To run Remote Desktop Connection, complete the following steps: 1. Click Start > All Programs > Accessories > Remote Desktop Connection. 2. Click the Computer drop-down list. 3. Select Browse for more. 4. Select the HP Integrity server you want to establish a connection with. 5. Click OK. 6. Click Connect. 7. Log in to the remote server. The server desktop appears remotely. Verify System Device Drivers and Register for Updates Verify System Device Drivers The Windows Device Manager is a comprehensive tool for detecting and evaluating problems with installed hardware devices and resource conflicts. NOTE: If you installed the OS from Microsoft OS media, you must install new drivers for all devices displaying a yellow "bang (!)" icon in the Windows device manager. These drivers are available on the HP Smart Setup media. To verify driver status and update if necessary, complete the following steps: 1. From Windows Desktop, select Start > Server Manager. 2. In the Server Summary section, click Change System Properties. 3. In the System Properties window, click on the Hardware tab. Then click Device Manager. Verify System Device Drivers and Register for Updates 55