HP Jetdirect 690n HP Jetdirect Print Servers - Administrator's Guide - Page 91
Firmware Upgrade, LPD Queues, Browse, Upgrade Firmware, Prepend String Name, Append, String Name
View all HP Jetdirect 690n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Table 4-13 Miscellaneous Settings (continued) Item Description IPP Printing Internet Printing Protocol printing. LPD Printing (RAW) Default LPD raw queue printing. LPD Printing (TEXT) Default LPD text queue printing. LPD Printing (AUTO) Default LPD auto queue printing. LPD Printing (BINPS) Default LPD binary PostScript queue printing. LPD Printing () List up to 5 LPD queues (if configured), where is the name of the user-specified LPD print queue. The default depends on the printer, typically 9100 Printing or LPD Printing (BINPS). Firmware Upgrade For print servers that support firmware upgrades, use this tab to upgrade the print server with new features. The firmware upgrade file for the print server must be available on your system. To identify and retrieve the appropriate upgrade file, click HP Jetdirect Firmware Updates (Internet access required), or visit HP online support at: http://www.hp.com/go/webjetadmin_firmware From the HP online firmware upgrade page, use the following steps: 1. Locate the print server model (or product number) and the upgrade file. 2. Check the upgrade file version and verify that it is more recent than the print server's installed version. If it is, then download the file. If not, then you do not need to upgrade. To upgrade the print server using the embedded Web server: 1. Enter the path to the upgrade file (Firmware File), or click Browse to locate it. 2. Click Upgrade Firmware. LPD Queues Use the LPD Queues page to specify LPD print queues on the HP Jetdirect print server. For more information on LPD printing and print queues, see LPD printing on page 155. You must enable LPD printing on the print server before you can set LPD queues. If LPD is disabled, go to the Misc. Settings on page 79 tab and enable it. If LPD printing is enabled, ten different named print queues are available. Four of these queues are configured automatically and their parameters cannot be changed. You can configure the remaining six queues. NOTE: Value-based print servers do not support user-defined LPD queues. You can set up the six modifiable queues with character strings, such as job control commands, that are automatically added before or after the print job. You can define up to eight named strings, setting each queue so that the named string either precedes (Prepend String Name) or follows (Append String Name) the print data. ENWW Networking tab 81