HP KS523AA HP USB Hybrid ATSC/NTSC/QAM/FM TV Tuner - Quick Setup - Page 2

Step 4 Set up your audio and video hardware components. Choose only 1 option. After you complete the option, continue to Step 5. NOTE: You can use the USB extender cable to lengthen the distance from the computer to the TV tuner. Option A Connecting with the antenna 1. Insert the TV tuner 1 into a USB port on the computer. 2. Connect the TV tuner antenna cable 2 to the TV tuner. NOTE: Due to power and bandwidth requirements, do not connect the TV tuner to a USB hub. Option B Connecting with regular TV or cable TV without a receiver 1. Insert the TV tuner 1 into a USB port on the computer. 2. Connect an RF coaxial cable (purchased separately) to the TV tuner 2 and then to your regular TV or cable TV wall jack 3. 3 Option C Connecting with satellite TV or cable TV with a receiver NOTE: Refer to your cable or satellite receiver user guide for the exact location and labeling of components. 1. Connect an RF coaxial cable (purchased separately) from your cable or satellite TV wall jack 1 to the TV-In jack on your cable or satellite receiver 2. 2. Connect an RF coaxial cable (purchased separately) from the TV-Out jack 3 on your cable or satellite receiver to the TV tuner 4. 3. Insert the TV tuner into a USB port 5 on the computer. 1 2 1 2 1 2 3. Connect the remote sensor to a USB port on the computer. 3. Connect the remote sensor to a USB port on the computer. (See Option A, step 3 for details.) Continue to Step 5 to complete the setup of your TV tuner. 3 5 4 Continue to Step 5 to complete the setup of your TV tuner. 4. Connect the remote sensor to a USB port on the computer. (See Option A, step 3 for details.) 5. Connect the IR emitter cable to the remote sensor 1. NOTE: Be sure that you connect the IR emitter cable to the connector marked with a "1" on the remote sensor. 6. Remove the backing paper from the IR emitter to expose the adhesive tape 2. 7. Press the adhesive side of the IR emitter onto the infrared (IR) lens on the front of the receiver 3. 2 Step 5 Set up your software 1. Turn on the computer. 2. Press the media button on the computer to open your multimedia software. 3. When the Setup Wizard opens, follow the on-screen instructions to set up your software. Running the Setup Wizard NOTE: When you set up the TV tuner for the first time, you must run the Setup Wizard. Later, if you change your TV tuner connections, add components, or switch between digital and analog connections, you must run the Setup Wizard again. If the Setup Wizard does not to open after you perform the preceeding steps, or if you have already run the Setup Wizard and would like to run it again, perform either of the following procedures: Using MediaSmart 1. To run the Setup Wizard using MediaSmart, follow these steps: • From your Windows desktop, select Start > HP MediaSmart. - or - • Press the media button on the computer. 2. Click the TV icon on the SmartMenu. 3. Click the Settings icon, and then select Run Setup Wizard. 4. Follow the on-screen instructions. Using QuickPlay To run the Setup Wizard using QuickPlay, follow these steps: 1. Open QuickPlay: • From your Windows desktop, select Start > QuickPlay. - or - • Press the media button on the computer. 2. Click the TV icon on the menu bar. 3. Click the i icon on the menu bar at the left of the screen. 4. On the menu, click Run Setup Wizard. Using Windows Media Center To run the Setup Wizard using Windows Media Center, follow these steps: 1. Open Windows Media Center by clicking Start > Windows Media Center from your Windows desktop. 2. Select Tasks > Settings > General > Windows Media Center Setup > Run Setup Again. 3. Follow the on-screen instructions NOTE: If this is not the first time you have run the Setup Wizard, you will lose any existing Windows Media Center settings and preferences. 3 1 NOTE: To help locate the IR lens, shine a flashlight on the front of the receiver. The IR lens is usually a small, dark-red window. NOTE: If you cannot place the emitter directly over the IR lens, place it as close to the IR lens as possible. Continue to Step 5 to complete the setup of your TV tuner.