HP Kayak XA-s 02xx HP Kayak XA-s Series 02xx, Installing , Connecting & Se - Page 3
Connecting to a Network (Selected Models Only), Selected Models Only
View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
HP Kayak XA-s 02xx PC Workstation - Setting Up and Using Your HP Desktop PC Workstation Connecting to a Network (Selected Models Only) Connecting to a Network (Selected Models Only) Your PC Workstation has a 10BT/100TX LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects which network type is being used. 1 Connect the RJ-45 plug on your network cable to the LAN connector on your LAN PC Workstation Adapter. Push the plug into the connector until the plug clicks into place. 2 Attach the other end of the LAN cable to a hub (or into a wall socket that is connected to a hub). Let your Network Administrator know that you are connecting your PC Workstation to the network. Refer also to the online Network Administrator's Guide (preloaded on your PC Workstation) for further instructions on setting up your PC Workstation for a LAN connection. English 3