HP Kayak XU 03xx HP Kayak XU Series 03xx, Configuring a SCSI Accessory For You - Page 5
Boot Device, Configuration Menu, SCSI Device, Set Initiate Sync Negotiation
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
HP Kayak XU 03xx PC Workstation Configuring a SCSI Accessory Boot Device Configuration Menu This menu lets you configure the SCSI boot device. To find out the SCSI ID of a specific SCSI device, you can run the SCSI Disk Utilities (refer to page 8). Boot Device Configuration Select SCSI peripheral from which to boot To view peripheral by ID# select "SCSI Disk Utilities" from previous menu Boot SCSI ID 0 Option Listed Below Has NO EFFECT if MULTI LUN Support is Disabled Boot LUN Number 0 Use the and keys to move between options. Press to display a menu with a selection of values. • Boot SCSI ID This parameter is the SCSI ID of the boot device. The default value is 0. • Boot Lun Number More advanced SCSI devices can have several logical units. This option indicates the logical unit (or Lun) on which to boot for the drive chosen in the Boot SCSI ID. The default value is 0. SCSI Device Configuration Menu This menu lets you configure parameters for each SCSI device on the SCSI bus. To configure a specific SCSI device, you need to know which SCSI ID it uses. To know the SCSI ID of a specific SCSI device, you can run the SCSI Disk Utilities (refer to page 8). SCSI Device ID SCSI Device Configuration #0 #1 #2 #3 #4 #5 #6 #7 Initiate Sync Negotiation... yes yes yes yes yes yes yes yes Maximum Sync Transfer Rate.. 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 Enable Disconnection........ yes yes yes yes yes yes yes yes Initiate Wide Negotiation... yes yes yes yes yes yes yes yes Options Listed Below Have NO EFFECT if the BIOS is Disabled Send Start Unit Command.... no no no no no no no no BIOS Multiple LUN Support.. no no no no no no no no Include in BIOS Scan....... yes yes yes yes yes yes yes yes Use the and keys to move between options. Press to display a menu with a selection of values. • Initiate Sync Negotiation Some older SCSI-1 devices do not support synchronous negotiation. Set Initiate Sync Negotiation to No for these devices. English 5