HP Kayak XU 03xx HP Kayak XU Series 03xx, Technical Information - Page 9

Disk Striping Features FastRAID - t r manual

Page 9 highlights

HP Kayak XU 03xx PC Workstation Technical Information System Specifications HP FastRAID • Acceleration of Internal UltraWide 16-bit SCSI only • Top performance with two superfast 4.5 GB or 9.1 GB 10,000 rpm hard disks • SCAM not supported Disk Striping Features (FastRAID) Feature: Computer bus Host bus data transfer rate Device protocol Advanced HP FastRAID features Device support Array support Operating system Remote management SCAM Description: 32-bit PCI local bus and HP FastRAID socket connector Up to 133 MB per second UltraWide 16-bit SCSI • Array status monitoring and event notification • Adjustable stripe width Up to 5 HDD/non-HDD SCSI devices per system board channel • Drives can be configured as RAID 0 (with 1 or 2 disk drives) and RAID 1 (with 2 disk drives). With 2 disk drives, both drives should be the same speed (10,000 rpm) and the same capacity (both 14.5 GB or 9.1 GB) • Drives can also be added in non-array environments Windows NT 4.0 Windows NT 4.0 Not supported; SCSI addresses must be set manually on UltraWide 16-bit SCSI channel English 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

English
9
HP Kayak XU 03xx PC Workstation
Technical Information
System Specifications
Disk Striping Features (FastRAID)
HP FastRAID
Acceleration of Internal UltraWide 16-bit SCSI only
Top performance with two superfast 4.5 GB or 9.1 GB
10,000 rpm hard disks
SCAM not supported
Feature:
Description:
Computer bus
32-bit PCI local bus and HP FastRAID socket connector
Host bus data transfer rate
Up to 133 MB per second
Device protocol
UltraWide 16-bit SCSI
Advanced HP FastRAID
features
Array status monitoring and event notification
Adjustable stripe width
Device support
Up to 5 HDD/non-HDD SCSI devices per system board channel
Array support
Drives can be configured as RAID 0 (with 1 or 2 disk drives) and
RAID 1 (with 2 disk drives).
With 2 disk drives, both drives should be the same speed
(10,000 rpm) and the same capacity (both 14.5 GB or
9.1 GB)
Drives can also be added in non-array environments
Operating system
Windows NT 4.0
Remote management
Windows NT 4.0
SCAM
Not supported; SCSI addresses must be set manually on UltraWide
16-bit SCSI channel