HP Kayak XU 04xx HP Kayak XU Series 04xx, Technical Information - Page 8
System Board Switches, Switch, Use Switch
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
HP Kayak XU PC Workstation Technical Information System Connectors and Switches System Board Switches Your PC Workstation's system board switches may look like either of the examples documented here. UP=OFF DOWN=ON OPEN=OFF CLOSED=ON Switches 2 through 5 are used for processor settings and should be changed if the processor supplied with the PC Workstation is replaced with a faster one. Switches 6 to 10 are used as shown in the following table: Switch Use Switch to: 1 - RESERVED Do not use (OFF - DEFAULT) 6 - CLEAR CMOS Retain or clear CMOS memory: • OFF to retain CMOS memory - DEFAULT • ON to clear CMOS memory. 7 - CLEAR PASSWORD Enable or clear (and disable) User and System Administrator Passwords stored in EEPROM: • OFF to enable passwords - DEFAULT • ON to clear passwords. 8 - KEYBOARD POWER ON Enable or disable power on using the keyboard: • OFF to disable keyboard power on • ON to enable keyboard power on - DEFAULT. 9 - RESERVED Do not use (ON - DEFAULT) 10 - BIOS RECOVERY • OFF to enable normal mode - DEFAULT. • ON to enable recovery mode. 8 English