HP Kayak XU 04xx HP Kayak XU Series 04xx, Troubleshooting Your PC Workstation - Page 20
If You Have a Network Problem, your PC Workstation.
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
HP Kayak XU PC Workstation Troubleshooting Your HP PC Workstation If Your PC Workstation Has a Software Problem If You Have a Network Problem If you have a problem with your PC Workstation's network, run the HPIEDIAG utility provided on the HP CD-ROM that contains the LAN drivers, supplied with your PC Workstation. This utility should be run from a minimal DOS system, without any LAN drivers loaded-achieve this by booting from a system floppy disk. (If your PC Workstation is running Windows NT 4.0, you will need to create this system floppy disk on another PC.) 1 Insert the system floppy disk in the floppy disk drive and re-boot your PC Workstation. 2 Insert the CD-ROM containing the HPIEDIAG utility in the CD-ROM drive. 3 Make the CD-ROM drive the current drive by typing, for example, D: if D is the letter of your CD-ROM drive. 4 Change to the DIAG directory by typing: CD\LAN\DIAG . 5 Start the HPIEDIAG utility by typing: HPIEDIAG the instructions on the screen. . Follow Then check the configuration of the integrated Ethernet interface using the Setup program. Refer also to the Network Administrator's Guide preloaded onto your PC Workstation. 20 English