HP L7580 User Guide - Page 171
Solve copy problems, No copy came out, Copies are blank, Wrong original was copied, Check the power
UPC - 882780620650
View all HP L7580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
• Make sure that the tray is completely loaded. If you are using special media that is only available in small quantities, try placing the special media on top of other paper of the same size to help fill the tray. (Some media is picked up more easily if the tray is full.) • When reinserting Tray 2 (optional) into the device, do so gently. Forceful insertion with a full stack of paper may cause sheets to slide up within the device, causing the device to jam or pick multiple sheets at one time. • Use HP media for optimum performance and efficiency. Solve copy problems If the following topics do not help, see Support and warranty for information about HP support. No copy came out • Check the power Make sure that the power cord is securely connected, and the device turned on. • Check the status of the device • The device might be busy with another job. Check the control-panel display for information about the status of jobs. Wait for any job that is processing to finish. • The device might be jammed. Check for jams. See Clear jams. • Check the trays Make sure that media is loaded. See Load media for more information. Copies are blank • Check the trays • If you are copying from the ADF, make sure that the originals have been loaded correctly. For more information, see Load an original in the automatic document feeder (ADF). • If you are copying from the scanner glass, make sure that the ADF is empty. • Check the media The media might not meet Hewlett-Packard media specifications (for example, the media is too moist or too rough). See Select print media for more information. • Check the settings The contrast setting might be set too light. Use the Copy button on the control panel to create darker copies. Wrong original was copied Check the trays If you are copying from the scanner glass, make sure that the ADF is empty. Solve copy problems 167