HP LE2001wm HP LE1851w, LE2001w, and LE2001wm LCD Monitors - Page 22
Image Control, Auto-Adjustment, Open Auto-Adjustment Software, the OSD Main Menu. Refer - 20
View all HP LE2001wm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
To use the auto-adjustment feature: 1. Allow the monitor to warm up for 20 minutes before adjusting. 2. Press the OK/auto button on the monitor front panel. ● You can also press the Menu button, then select Image Control > Auto-Adjustment from the OSD Main Menu. Refer to Adjusting the Monitor Settings on page 16 in this chapter. ● If the result is not satisfactory, continue with the procedure. 3. Insert the CD in the disc drive. The CD menu is displayed. 4. Select Open Auto-Adjustment Software. The setup test pattern is displayed. 5. Press the OK/auto button on the monitor front panel to produce a stable, centered image. 6. Press the ESC key or any other key on the keyboard to exit the test pattern. 14 Chapter 4 Operating the Monitor ENWW
To use the auto-adjustment feature:
1.
Allow the monitor to warm up for 20 minutes before adjusting.
2.
Press the
OK/auto
button on the monitor front panel.
●
You can also press the
Menu
button, then select
Image Control
>
Auto-Adjustment
from
the OSD Main Menu. Refer to
Adjusting the Monitor Settings
on page
16
in this chapter.
●
If the result is not satisfactory, continue with the procedure.
3.
Insert the CD in the disc drive. The CD menu is displayed.
4.
Select
Open Auto-Adjustment Software
. The setup test pattern is displayed.
5.
Press the
OK/auto
button on the monitor front panel to produce a stable, centered image.
6.
Press the
ESC
key or any other key on the keyboard to exit the test pattern.
14
Chapter 4
Operating the Monitor
ENWW