HP LH3000r HP Netserver LH 3 NetRAID Installation Guide - Page 3
HP NetServer LH 3, NetRAID HP Rack Storage/8, Cluster Configuration Guide, Introduction, What's
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
HP NetServer LH 3 with NetRAID (HP Rack Storage/8) Cluster Configuration Guide 14 July 1998 (see Versions at the end of this document) Introduction This document defines the supported HP NetServer LH 3 configurations for Microsoft Cluster Server. These configurations minimize single points of failure, provide maximum availability, and have been certified by Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the HP NetServer LH 3 configurations supported by HP. Any configuration not expressly allowed by this guide will not be supported by HP. What's Defined in Cluster • Cluster • SPUs • Local and Shared Storage • Intra-cluster and Client LANs • Shared Storage Cabling Cluster Type of SPUs Installation Number of nodes Shared Storage LANs: Client LAN Intra-cluster (Heartbeat) LAN Power source HP NetServer LH 3 Each node must be the same model SPU, but may have different size main memory, cache, and CPU clock speeds. Pedestal or racked 2 HP Rack Storage/8 with HP NetRAID controller and HP disks. See Shared Storage below. Any NIC that is HP and Microsoft approved. See Client LAN below. HP D5013A or J3171A only with crossover cable. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS.