HP LH3000r HP Netserver LH Pro NetRAID Installation Guide - Page 4
Storage
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Hot swap cages Local storage I/O slots: HP NetServer LH Pro 6/200 Model 1 200 MHz 2 (at least two are required) 4.05.14 PF or later Any size 128 MB minimum. Must be HP. 2 May use for local storage; but not use for shared storage. Internal or external, using any controller. Must use HP disks. See Local Storage below. P9 - Shared storage controller (P8 if using NetRAID for local storage.) P7 - Intra-cluster (Heartbeat) LAN P6 - Client LAN All others - Any other plug-in cards. Storage Local Physical drive location Disk drives Cables Controller SPU internal drive bays, or HP external drive cabinet (e.g., HP Storage System/6), or any combination. Must be HP Must be HP and < 3 m total length for external drive cabinet. SPU embedded controller or any controller (any number, manufacturer or driver) in any available I/O slot. Use P9 for NetRAID local storage. See SPU I/O slots above. Shared Controller Model No. of controllers Firmware Driver NetRAID Assistant SPU I/O slot SCSI ID Channels RAID level Logical disks Configuration options: HP NetRAID D4943A Use with HP Storage System/6 and HP Cluster Adapter only. 1 maximum S.01.00 2.03 A.01.09 P9 (P8 if using NetRAID for local storage.) 6, 7 0 and 1 only Do not use channel 2 for any purpose. 1, 5, 10, and 50 only 1 per RAID array 6 maximum per NetRAID adapter Cluster mode on (cache write-through, no hot spare) Ultra SCSI disabled Termination: wide channel or automatic Set any other options as you prefer 2