HP LH4r hp lc 2000 and virtual array config guide — for the VA 74 - Page 2

lc2000nt71-74 Server Configuration Parameter RAM Number of power supplies I/O slots Default boot order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack HP Surestore Auto Path VA Specification 128 MB, minimum. Must be HP. One standard, two required for redundancy Added cards may be installed in any appropriate slot, considering the server default boot order provided below. IDE CD-ROM, FDD, SCSI A, SCSI B, PCI-1, PCI-2, PCI-3, PCI-4, PCI64-5, PCI64-6 Embedded SCSI or NetRAID-1M For embedded SCSI on Ultra2 models, sym_hi.sys, version 4.12, or later For NetRAID-1M, use mraidnt.sys, version 4.05 or later. (drivers obtained from Navigator CD-ROM, version L.20.00, or later) Server internal drive bays, or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications, and any SCSI bus speed Any Version M.04.00, or later Microsoft Window NT® Server 4.0, Enterprise Edition SP6a Version 1.03.00 or later. Required only if two Fibre Channel Host Bus Adapters are configured for shared storage. No Load Balancing is set for the FC HBA devices on each node. See the dual HBA diagram on page 5 for more information. Shared Storage Configuration Parameter Controller Model Number of controllers Driver Registry settings Specification HP D8602B Fibre Channel Host Bus Adapter One or two Dual HBA controller configurations require running HP Surestore Auto Path VA. Note that the purpose of the second HBA is to provide an alternate path for automatic failover only. Afcnt4.sys, version 3.0.4107.0 (driver obtained from Navigator CD-ROM, version M.04.00, or later) N_Port enabled for Fabric configurations NL_Port enabled for Arbitrated Loop configurations Refer to the readme file included with the HBA driver for instructions on modifying driver parameters. 3/11/02 2