HP LH4r hp lt 6000r and xp512 disk array config guide — for Micro - Page 2

lt6000r2kxp Server Configuration Parameter I/O slots Default boot order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack Power distribution Layout Specification Added cards may be installed in any appropriate slot, considering the server default boot order provided below. IDE CD-ROM, FDD, embedded SCSI A, Embedded SCSI B, PCI slot 6, PCI slot 5, PCI slot 4, PCI slot 3, PCI slot 2, PCI slot 1 Embedded SCSI, or embedded DAC For embedded SCSI, sym_hi.sys, version 4.12, or later For embedded DAC, mraid35x.sys, version 2.66, or later (all drivers obtained from Navigator CD-ROM, version L.20.00, or later) Server internal drive bays, or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications, and any SCSI bus speed Any Version L.20.00, or later Microsoft Windows® 2000 Advanced Server Latest service pack Redundant power distribution units (PDUs) are recommended. Shared Storage Configuration Parameter Controller Model Number of controllers Driver Enclosure Microcode RAID level LUN Emulations Disk drives Port host mode Port fabric mode Connections Fibre Channel Cables 50 meter 100 meter Specification HP Fibre Channel host bus adapter HP D8602B One Afcw2k.sys, version 3.0.4107.0 (driver obtained from Navigator CD-ROM, version M.04.00, or later) HP Surestore E Disk Array XP512 01-15-10-00/00 5 OPEN-3 Must be HP. Refer to support manuals. 08 Fabric Off/FC-AL On Direct Fibre Channel HP D6980A HP D6981A 12/11/01 2