HP LH4r HP NetRAID DIMM Installation Guide - Page 10
Tools You Need
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
The following procedures are required to install the DIMM: A. Shutting Down and Disconnecting Power B. Removing Cover 1 C. Disconnecting the BBM, if present D. Replacing the DIMM E. Reconnecting the BBM, if present F. Replacing Cover 1 G. Restarting the HP NetServer Tools You Need The following materials are also required to install this upgrade: • Anti-static Service Kit (3M® part number 8501/8502/8505 or equivalent) containing a wrist strap, anti-static mat, and cable. Use this kit to prevent damage to the system from static electricity. • T15 Torx® driver • T25 Torx driver (required for systems mounted in HP racks) 4
4
The following procedures are required to install the DIMM:
A.
Shutting Down and Disconnecting Power
B.
Removing Cover 1
C.
Disconnecting the BBM, if present
D.
Replacing the DIMM
E.
Reconnecting the BBM, if present
F.
Replacing Cover 1
G.
Restarting the HP NetServer
Tools You Need
The following materials are also required to install this upgrade:
•
Anti-static Service Kit (3M
®
part number 8501/8502/8505 or
equivalent) containing a wrist strap, anti-static mat, and cable.
Use this kit to prevent damage to the system from static
electricity.
•
T15 Torx
®
driver
•
T25 Torx driver (required for systems mounted in HP racks)