HP LH4r HP Netserver LC 2000 FC Config Guide - Page 3

Host Bus Adapter Model No. of controllers Driver RAID level Cabinet RAID arrays Number of cabinets HP Fibre Channel Host Bus Adapter - HP D8602A 1 Hhba5100.sys 2.06 0, 1, 3, 5, 10 For SPOFless configurations a fault tolerant RAID type, e.g. RAID 5, is recommended for all shared storage. HP NetServer Rack Storage/12FC- D5991A Not more than eight physical drives per logical array and not more than eight LUNs are permitted per cluster. 1 FC Array Cards No. of cards per cabinet Firmware Status SCSI ID Disk SCSI IDs Disk drives: HP Fibre Channel Array Controller - D5990A 2 (Requires second card be installed in the Rack Storage/12FC) 4.64-00 or later. For SPOFless, use 5.46-04 5 (fixed) 0 - 3, 8 - 15 (fixed) Any HP drive supported by storage enclosure Fibre Channel Cables Hub Model Quantity Optical - Server to Hub Only: 50 meter D6980A 100 meter D6981A Copper - Server to Hub and/or Shared Storage to Hub: 3 meter D6978A 5 meter D6979A 10 meter D7080A HP D6976A 6-port fibre channel hub Or HP P4459A 8-port switch 1 2 for SPOFless with hubs HP Rack Storage/12 Number of cabinets: Model Status SCSI ID Disk SCSI IDs Disk drives: Cables LANs Optional 1 - 2 HP Rack Storage/12 - D5989B or C plus two D6025B or two D6025C SCSI cards for each cabinet 5 (fixed) 0 - 3, 8 - 15 (fixed) Same as HP Rack Storage/12FC Any HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN 3 Client LAN