HP LH4r hp netserver lc 2000 netraid-2m config guide — for Micros - Page 5
Another NetRAID Adapter may
 |
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
NetRAID-2M Controllers 0 1 lc2000nt2m NOTES: 2. Cables between the servers and shared storage cabinets can be any HP LVD SCSI cable up to 10 meters. See "Cables"in the Shared Storage Configuration table in the guide for a list of cables that can be used. 3. Another NetRAID Adapter may be installed in each server for local storage (and must connect only to local storage). 4. This diagram shows use of two NetRAID-2M controllers, the maximum supported for shared storage, installed in slots 5 and 6. One or two NetRAID-2M cards may be used, and one to four RS/12s are supported. A maximum of eight logical drives are supported for the cluster. HP Netserver LC 2000 Cluster using HP Rack Storage/12 Cabling Diagram 2/23/02 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
lc2000nt2m
2/23/02
5
3.
Another NetRAID Adapter may be
installed in each server for local
storage (and must connect only to
local storage).
4. This diagram shows use of two
NetRAID-2M controllers, the maximum
supported for shared storage,
installed in slots 5 and 6. One or two
NetRAID-2M cards may be used, and
one to four RS/12s are supported.
A maximum of eight logical drives are
supported for the cluster.
0
1
NetRAID-2M Controllers
NOTES:
2.
Cables between the servers and
shared storage cabinets can be any
HP LVD SCSI cable up to 10
meters. See “
in the Shared
Storage Configuration table in the guide
for a list of cables that can be used.
Cables”
HP Netserver LC 2000 Cluster using HP Rack Storage/12 Cabling Diagram