HP LH4r hp netserver lc 2000 netraid-2m config guide — for Micros - Page 2
Local Storage, System software, Power distribution, Controller
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
LC20002K2M Server Configuration Parameter I/O slots Default boot order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack Power distribution Layout Specification Added cards may be installed in any appropriate slot, considering the server default boot order provided below. IDE CD-ROM, FDD, SCSI A, SCSI B, PCI-1, PCI-2, PCI-3, PCI-4, PCI64-5, PCI64-6 Embedded SCSI, NetRAID-1M, or NetRAID-2M (in addition to shared storage NetRAID-2M controller) For embedded SCSI, sym_u3.sys, version 5.07.00, or later For NetRAID-1M or NetRAID-2M, mraid2k.sys, version 5.20, or later (all drivers obtained from Navigator CD-ROM, version L.20.00, or later) Server internal drive bays, or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications, and any SCSI bus speed Any Version M.04.00, or later Microsoft Windows® 2000 Advanced Server SP1 Redundant power distribution units (PDUs) are recommended. See power cabling diagram on page 6. Shared Storage Configuration Parameter Controller Model Number of controllers BIOS Firmware Driver NetRAID Assistant SCSI ID Channels RAID levels Logical disks Configuration options Specification HP NetRAID-2M Controller, Model P3411A, or P3475A One or two Disabled Version H.01.08 (firmware obtained from Navigator CD-ROM, version M.04.00, or later) mraid2k.sys, version 5.20 (driver obtained from Navigator CD-ROM, version L.20.00, or later) Version B.01.04, or later (software obtained from Navigator CD-ROM, version L.20.00, or later) 6, 7 0, 1 1, 5, 10, 50 One per RAID array Eight, maximum, per cluster Cluster mode on Cache write policy to Write thru 8/13/01 2