HP LH4r HP Netserver LC 2000 NetRAID-3Si and RS/12 Windows NT 4.0 Enterprise - Page 2

System software: Navigator version Operating System Service pack supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. L.18.00 or later Microsoft Windows NT Server 4.0, Enterprise Edition SP6A or later SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order M/S Certified Configuration HP NetServer LC 2000 533, 600, 667, 733, 800, 933, 1000 MHz 2 4.06.20 PV or later (533, 600, 733 MHz) 4.06.23 PV or later (800, 933 MHz) 4.06.25 PV or later (1000 MHz) Any size 128 MB minimum. Must be HP. 1 standard, 2 required for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, SCSI A, SCSI B, PCI-1, PCI-2, PCI-3, PCI-4, PCI64-5, PCI64-6 M/S Certified Configuration: P1 - Local storage (NetRAID-1Si) P3 - Client LAN (D5013B) P5 - Shared Storage (NetRAID-3Si) Booted from embedded SCSI in tests up to 1000 MHz. Booted from NetRAID-1Si in 1000 MHz certification Storage Local Controller Driver Cabinets (Physical drive location) Disk drives SCSI bus SCSI Ids May use embedded SCSI, NetRAID-1Si, or NetRAID-3Si. For embedded SCSI, use sym_hi.sys version 4.12 or later For NetRAID-xSi, use mraidnt.sys version 2.24 SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP (hot swap or fixed) Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared Controller Model No. of controllers Firmware BIOS Driver NetRAID Assistant HP NetRAID-3Si Adapter D5955A 1 W.01.30 B.02.02 Mraidnt.sys 2.24 A.01.15 or later 2