HP LH4r HP Netserver LC 2000 RS/12FC /Windows 2000 Advanced Server Cluster Con - Page 1
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP NetServer LC 2000 with HP Rack Storage/12FC Windows 2000 Advanced Server Cluster Configuration Guide 16 May 2000 (see Versions at the end of this document) Introduction This document defines the supported HP NetServer LC 2000 configuration with HP Rack Storage/12FC and Microsoft Cluster Server. These configurations minimize single points of failure (SPOF), provide maximum availability, and have been certified by Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the configurations supported by HP. Any deviance to these configurations can result in an inoperative cluster or an operating cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP. What's Defined in Cluster Cluster SPUs Local and Shared Storage Intra-cluster and Client LANs Shared Storage Cabling Cluster Type of SPUs Installation Number of nodes Shared Storage LANs: Client LAN Intra-cluster (Heartbeat) LAN HP NetServer LC 2000 Each node must be the same model SPU, but may have different size main memory, cache, and CPU clock speeds. Pedestal or racked 2 HP Rack Storage/12FC with 2 FCArray Cards, HP disks, and using a HP D8602A HBA in the server. See Shared Storage below. Any NIC that is HP and Microsoft approved. See Client LAN below. Embedded NIC with crossover cable. See Intra-cluster LAN below.