HP LH4r HP Netserver LC II NetRAID Config Guide for Windows NT4.0 Clusters - Page 1
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP NetServer LCII with NetRAID (HP Storage System/6) Cluster Configuration Guide 1 June 1998 Introduction This document defines the supported HP NetServer LCII and HP Storage System/6 configurations for Microsoft Cluster Server. These configurations minimize single points of failure, provide maximum availability, and have been certified by Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the configurations supported by HP. If you create any configuration not expressly allowed by this guide it will not be supported by HP. HP NetServer clusters have been carefully designed and tested to allow as much configuration flexibility as possible consistent with highavailability. What's Defined • Cluster • SPUs • LANs • Local Storage • Shared Storage Cluster Type of SPUs Number of nodes Shared Storage LANs: Client Intra-cluster Power source System software: Navigator version Operating System HP NetServer LCII Each node must be the same model SPU, but may have different size main memory, cache, and number of CPUs. 2 HP Storage System/6 with HP NetRAID controller and HP disks. See Shared Storage below. Any NIC that is HP and Microsoft approved. See Client LAN below. HP D5013A or J3171A only with crossover cable. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. G.01.55 or later Microsoft Windows NT Server 4.0, Enterprise Edition