HP LH4r hp netserver lc2000 fc config guide — SPOF and SPOFless f - Page 2

lc2000ntfc Server Configuration Parameter Clock speed Number of CPUs BIOS CPU cache RAM Number of power supplies I/O slots Default boot order Local Storage Controller Driver Physical drive location Disk drives SCSI bus SCSI IDs System software Navigator CD-ROM Operating system Service pack Power distribution Layout Specification 1 GHz This certification covers any CPU rate within 500 MHz of the certified speed. Two Ultra2 models- Version range 4.06.25 PV to 4.06.30 PV Ultra3 models- Version 4.06.03 RM, or later Any size 128 MB, minimum. Must be HP. One standard, two required for redundancy Added cards may be installed in any appropriate slot, considering the server default boot order provided below. IDE CD-ROM, FDD, embedded SCSI A, embedded SCSI B, PCI slot 1, PCI slot 2, PCI slot 3, PCI slot 4, PCI slot 5, PCI slot 6 Embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M, or NetRAID-2M For SPOFless configurations, configure drives in a RAID-1 mirror, or another fault tolerant, hardware RAID level. For embedded SCSI on Ultra 2 models, sym_hi.sys, version 4.12, or later For embedded SCSI on Ultra 3 models, sym_u3.sys, version 5.05, or later For NetRAID-1Si/3Si, mraidnt.sys, version 2.24, or later For NetRAID-1M/2M, mraidnt.sys, version 4.05, or later (all drivers obtained from Navigator CD-ROM, version L.20.00, or later) Server internal drive bays, or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications, and any SCSI bus speed Any Version L.19.00, or later Microsoft Windows NT® Server 4.0 Enterprise Edition SP6a Redundant power-distribution units (PDUs) are recommended. See power cabling diagram on page 9. Shared Storage Configuration Parameter Controller Model Number of controllers Driver Specification HP Fibre Channel Host Bus Adapter (HBA), Model D8602A or D8602B One Afcnt4.sys, version 3.0.4107.0 (obtained from Navigator CD-ROM, version M.04.00) 12/20/01 2