HP LH4r HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LH4r manual content summary:
- HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 1
Storage/12FC Windows 2000 Advanced Server Cluster Configuration Guide 20 June 2000 (see Versions at the end of this document) Introduction This document defines the supported HP NetServer LH4 using the HP Rack Storage/12FC and Microsoft Cluster Server . This configuration minimizes single points - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 2
Local storage I/O slots: L.18.02 or later Microsoft Windows 2000 Advanced Server HP NetServer LH4 550, 700 MHz 2 - 4 4.06.22 PS or later (550 MHz) 4.06.32 PS or later (700 MHz) Any size 256 MB minimum. Must be HP. 3 required, 4 for redundancy See Local Storage below. P3 - Client LAN P4 - Intra - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 3
5 meter D6979A 10 meter D7080A Hub Model Quantity Required HP D6976A 6-port fibre channel hub 1 HP Rack Storage/12 Number of cabinets: Model Status SCSI D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or any equivalent The intra-cluster LAN may only - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 4
LAN. 1 minimum P3 Shared Storage Cabling This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer LH4, one required HP Rack Storage/12FC and one or two optional HP Rack Storage/12s. Only this cabling configuration and these cables are supported 4 - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 5
Heavy (blue) lines are fibre channel Optical or Copper cables. See inside this guide for specifications. Dashed (green) lines are offset SCSI cables. See inside this guide for specifications. HP Microsoft Cluster using HP Rack Storage/12FC and Rack Storage/12 and 6 Port Fibre Channel Hub (Duplex - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 6
Power Cabling to Separate Power Circuits 6 - HP LH4r | HP Netserver LH 4 FC Windows 2000 Config Guide for Windows 2000 Advan - Page 7
Versions 20 June 2000 19 May 2000 15 May 2000 Created PDF from final May 19th version. Corrected drawing. Initial release. 7
1
HP NetServer LH4
with
HP Rack Storage/12FC
Windows 2000 Advanced Server
Cluster Configuration Guide
20 June 2000
(see Versions at the end of this document)
Introduction
This document defines the supported HP NetServer LH4 using the HP Rack Storage/12FC and Microsoft
Cluster Server .
This configuration minimizes single points of failure (SPOF), provides maximum availability,
and has been certified by Hewlett-Packard and Microsoft.
This guide is prescriptive; it describes the
configuration supported by HP.
Any deviance to this configuration can result in an inoperative cluster or an
operating cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP.
What’s Defined in a Cluster
•
Cluster
•
SPUs
•
Local and Shared Storage
•
Intra-cluster and Client LANs
•
Shared Storage Cabling
Cluster
Type of SPUs
HP NetServer LH4
Each node must be the same model SPU, but may have different size
main memory, cache, and CPU clock speeds.
Installation
Pedestal or racked
Number of nodes
2
Shared Storage
HP Rack Storage /12FC with HP Fibre Channel Host Bus Adapter and HP
disks.
See
Shared Storage
below.
LANs:
Client LAN
Any NIC that is HP and Microsoft approved.
See
Client LAN
below.
Intra-cluster
(Heartbeat) LAN
HP D5013A with crossover cable. See
Intra-cluster LAN
below.
Power source
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.