HP LH4r HP Netserver LH 4 NetRAID-3Si Config Guide for Windows 2000 Advanced - Page 2

Intra-cluster (Heartbeat) LAN Power source System software: Navigator version Operating System SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order M/S Certified Configuration Storage Local Controller Driver HP D5013A/B with crossover cable. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. L.18.00 or later Microsoft Windows 2000 Advanced Server HP NetServer LH 4 700 MHz 2 - 4 4.06.32 PS or later Any size 256 MB minimum. Must be HP. 3 required, 4 for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, Embedded A, Embedded B, PCI-8, PCI-7, PCI-6, PCI-5, PCI-4, PCI-3, PCI-2, PCI-1 P3 - Intra-cluster (Heartbeat) LAN - D5013B P4 - Client LAN - D5013B P7 - Shared storage - NetRAID-3Si P8 - Local storage controller - NetRAID-1Si Booted from embedded DAC May use embedded SCSI, embedded DAC, NetRAID-1Si or NetRAID3Si. For embedded SCSI, use sym_hi.sys from Windows 2000 Adv. Server CD. For embedded DAC and NetRAID-xSi, use mraid35x.sys version 2.62 (Navigator L.18.04.5 or later). Cabinets (Physical drive location) Disk drives SCSI bus SCSI Ids SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP (hot swap or fixed) Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared Controller Model No. of controllers Firmware BIOS HP NetRAID-3Si Adapter D5955A 1 W.01.30 B.02.02 2