HP LH4r HP Netserver LH 6000 FC Config Guide for Windows NT4.0 Clusters - Page 3
HP Rack Storage/12, Optional
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
No. of cabinets FC Array Cards Model No. of cards/cabinet Firmware FC Array Assistant Status SCSI ID Disk SCSI IDs Disk drives: 1 HP Fibre Channel Array Controller - D5990A 2 (Requires second card be installed in the Rack Storage/12FC.) 5.46-04 (Navigator L.18.04.5 or later) A.002-5 5 (fixed) 0 - 3, 8 - 15 (fixed) Any HP drive supported by storage enclosure. Fibre-channel cables Optical (Server to Hub only): 50 meter D6980A 100 meter D6981A Copper (Shared Storage to Hub and Server to Hub ): 3 meter D6978A 5 meter D6979A 10 meter D7080A Hub Model Quantity HP D6976A 6-port fibre channel hub or Or HP P4459A 8-port switch 1 for SPOF 2 for SPOFless with Hubs HP Rack Storage/12 Number of cabinets: Model Status SCSI ID Disk SCSI IDs Disk drives: Cables Optional 1 - 2 HP Rack Storage/12 - D5989B or C plus two D6025B or two D6025C SCSI cards for each cabinet 5 (fixed) 0 - 3, 8 - 15 (fixed) Same as HP Rack Storage/12FC Any HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A LANs LAN connection NIC: Model Driver Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or equivalent The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. Client LAN Any LAN Embedded NIC Hptxnt.sys 3.27.00.0001 or later 3 Any that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List. Vendor supported driver.