HP LH4r HP Netserver LH 6000 NetRAID-4M Config Guide for Windows NT4.0 Cluste - Page 2

System software: Navigator version Operating System Service Pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order Microsoft® and HP Certified Configuration Storage supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. M.02.00 or later Microsoft Windows NT® Server 4.0 Enterprise Edition SP6a HP Netserver LH 6000 900 MHz 2 - 6 4.06.38 PU or later Any size 128 MB minimum. Must be HP. 3 standard, 4 required for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, SE SCSI C, Embedded A, Embedded B, PCI64-8, PCI64-7, PCI64-6, PCI64-5, PCI64-4, PCI64-3, PCI64-2, PCI64-1 P1 - Client LAN - D5013B P7- Shared Storage - NetRAID-4M Booted from Embedded DAC Local Controller Driver Physical drive location Disk drives SCSI bus SCSI Ids May use embedded SCSI, embedded DAC, NetRAID-1Si, NetRAID-3Si, NetRAID-1M or NetRAID-2M. For embedded SCSI, use sym_hi.sys 4.12 or later. For Embedded DAC or NetRAID-xSi, use mraidnt.sys version 4.05 For NetRAID-1M/2M, use mraidnt.sys, version 4.05 or later. All are from Navigator L.20.00 or later. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications and any SCSI bus speed Any Shared Controller Model No. of controllers BIOS Firmware Driver NetRAID-4M FAST SCSI ID HP NetRAID-4M Adapter D9161A or D9351A 2 Disabled 4584 Hpn.sys version 2.4.0.4571 2.4-0 or later 6, 7 2