HP LH4r HP Netserver LP 2000r NetRAID-4M Config Guide for Windows 2000 Advanc - Page 2

Power source System software: Navigator version Operating System Service Pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order Microsoft® and HP Certified Configuration Storage Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. L.20.00 or later Microsoft Windows® 2000 Advanced Server SP1 HP NetServer LP2000r 1 GHz 2 4.06.19 or later Any size 256 MB minimum. Must be HP. 1 standard, 2 required for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, PCI-1, PCI-2, PCI-3, Embedded SCSI P1 - Shared Storage NetRAID-4M Embedded NICs - Intra-cluster and Client LANs Booted from embedded SCSI Local Controller Driver Physical drive location Disk drives SCSI bus SCSI Ids May use embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M or NetRAID-2M. For embedded SCSI, use sym_hi.sys 4.12 or later. For NetRAID-xSi, use mraid35x.sys version 2.66. For NetRAID-1M/2M, use mraid2k.sys, version 5.20 or later. All are from Navigator L.20.00 or later. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications and any SCSI bus speed Any Shared Controller Model No. of controllers BIOS Firmware Driver NetRAID-4M FAST HP NetRAID-4M Adapter D9161A or D9351A 2 Disabled 4584 Hpn.sys version 2.4.0.4581 2.4-0 or later 2