HP LH4r HP Netserver LPr FC Windows 2000 Config Guide for Windows 2000 Advanc - Page 2

Power source System software: Navigator version Operating System SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM Local storage I/O slots Default Boot Order M/S Certified Configuration Storage Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. L.18.02 or later Microsoft Windows 2000 Advanced Server HP NetServer LPr 700, 800, 850 MHz 2 4.06.29.PR or later (700 MHz) 4.06.32 PR or later (800 MHz) 4.06.33 PR or later (850 MHz) Any size 256 MB minimum. Must be HP. See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, Embedded SCSI, PCI-3, PCI-2, PCI-1, PCI-4 P1 - Local storage (NetRAID-1Si) P2 - Client LAN (D5013B) P3 - Shared Storage FC HBA P4 - Intra-cluster (Heartbeat) LAN (D5013B) Booted from embedded SCSI in SPOF certification Booted from NetRAID-1Si in SPOFless certification Local Controller Driver Cabinets (Physical drive location) Disk drives SCSI bus SCSI Ids May use embedded SCSI, NetRAID-1Si, or NetRAID-3Si. For SPOFless, recommend NetRAID-xSi with drives in RAID-1 mirror, or another fault-tolerant RAID level. For embedded SCSI, use sym_hi.sys from Windows 2000 Adv. Server CD or later. For NetRAID-xSi, use mraid35x.sys version 2.62 (Navigator L.18.04.5 or later) SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP (hot swap or fixed). Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared HP Rack Storage/12FC Required - D5991A Host Bus Adapter Model No. of controllers Driver RAID level HP Fibre Channel Host Bus Adapter - HP D8602A or D8602B 1 HP D8602A - Hhba5100.sys 2.06 HP D8602B - Afcw2k.sys 3.0.3245.1 0, 1, 3, 5, 10 2