HP LH4r HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LH4r manual content summary:
- HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 1
defines the supported HP NetServer LT 6000r configurations with HP Rack Storage/12FC and Microsoft Cluster Server. These configurations minimize single points of failure (SPOF, SPOFless1) and provide extended availability. The specific configuration certified and supported by both HewlettPackard - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 2
2000 Adv. Server CD or later. For embedded DAC or NetRAID-xSi, use mraid35x.sys version 2.62 (Navigator L.18.04.5 or later) SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP (hot swap or fixed) Any HP cables that meet SCSI specifications and any - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 3
all shared storage. HP NetServer Rack Storage/12FC- D5991A Not more than eight physical drives per logical array and HP drive supported by storage enclosure including: HP 9.1 GB (7200 rpm) Low Profile Ultra2 SCSI Disk Module D6106A HP 9.1 GB (7200 rpm) Low Profile Ultra3 SCSI Disk Module P1217A HP - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 4
then the Client LAN NIC must use the same driver as the Intra-cluster NIC. 1 minimum For SPOFless, 2 NICs configured as a fault-tolerant team are recommended. Shared Storage Cabling This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer LT 6000r and - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 5
HP Microsoft Cluster (SPOF) using HP Rack Storage/12FC and Rack Storage/12 and 6 Port Fibre Channel Hub 5 - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 6
Power Cabling to Separate Power Circuits (For SPOFless with 2 hubs, connect second hub to PDU that first hub is not attached to) 6 - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 7
HP SPOFless Microsoft Cluster using HP Rack Storage/12FC and Rack Storage/12 and two 6 Port Fibre Channel Hubs 7 - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 8
HP SPOFless Microsoft Cluster using HP Rack Storage/12FC and Rack Storage/12 with Direct Connections 8 - HP LH4r | HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 9
Versions 29 January 2001 7 December 2000 29 November 2000 5 October 2000 23 May 2000 Added D8602B and driver. Corrected 2 hub spofless diagram Changed power diagram -all cords to same PDU. Added SPOFless configuration notes and diagrams. Initial release. 9
1
HP NetServer LT 6000r
with
HP Rack Storage/12FC
Windows 2000 Advanced Server
Cluster Configuration Guide
29 January 2001
(see
Versions
at the end of this document)
Introduction
This document defines the supported HP NetServer LT 6000r configurations with HP Rack Storage/12FC
and Microsoft Cluster Server. These configurations minimize single points of failure (SPOF, SPOFless
1
)
and provide extended availability.
The specific configuration certified and supported by both Hewlett-
Packard and Microsoft is defined, as are other guidelines to assist you in configuring your clustered
NetServers.
This guide is prescriptive; it describes the configurations supported by HP.
Any deviance to
these configurations can result in an inoperative cluster or an operating cluster with degraded performance,
hidden SPOFs, etc., and therefore will not be supported by HP.
What's Defined in Racked Cluster
Cluster
SPUs
Local and Shared Storage
Intra-cluster and Client LANs
Shared Storage Cabling
Cluster
Type of SPUs
HP NetServer LT 6000r
Each node must be the same model SPU, but may have different sizes of
main memory and cache, and different CPU clock speeds.
Number of nodes
2
Shared Storage
HP Rack Storage/12FC with 2 FCArray Cards, HP disks, and using an HP
D8602A or D8602B HBA in each server.
See
Shared Storage
below.
LANs:
1
For more information about configuring a SPOFless cluster, refer to the HP white paper,
High Availability
MSCS Cluster Solution
on the HP NetServers, HA Planning website.