HP LH4r HP Netserver LT 6000 FC Windows 2000 Config Guide for Windows 2000 Ad - Page 4
Shared Storage Cabling
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Model Status SCSI ID Disk SCSI IDs Disk drives: Cables LANs LAN connection NIC: Model Driver No. of NICs HP Rack Storage/12 - D5989B plus two D6025B or two D6025C SCSI cards for each cabinet 5 (fixed) 0 - 3, 8 - 15 (fixed) Same as HP Rack Storage/12FC Any HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or any equivalent. The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. Embedded NIC Hptxnt5.sys 4.01.67 (Windows 2000 A.S. CD) or later For SPOFless, use hptxnt5.sys version 4.2.27.0 (Navigator L.18.04.5) or later 1 Client LAN Any LAN Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. For SPOFless, use the D5013A or B Vendor supported driver NOTE If the NIC used is the same type as the embedded NIC (D5013A/B), then the Client LAN NIC must use the same driver as the Intra-cluster NIC. 1 minimum For SPOFless, 2 NICs configured as a fault-tolerant team are recommended. Shared Storage Cabling This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer LT 6000r and HP Rack Storage/12FC. Only these cabling configurations and these cables are supported. 4