HP LH4r HP Netserver LXr 8000 NetRAID-3Si Install. Guide - Page 44
Create Full Disk Partitions for each Array
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Disk Administrator, Scanned Logical Disks Create Full Disk Partitions for each Array 1. Click the disk box to select the shared array to be partitioned. Disk Administrator highlights the selected disk. 2. From Disk Administrator's Partition menu, choose Create. A dialog appears indicating the maximum size of a single partition. NOTE Don't be misled by the displayed disk capacity for your arrays. When Disk Administrator calculates disk capacity, it disregards redundancy storage used by the selected RAID level. The displayed and usable storage capacity for the array is, therefore, less than the total capacity of all drives in the array. For example, the displayed and usable array capacity for a RAID 5 array would be C(N-1), where N is the number of drives and C is the capacity of one drive. Likewise, for RAID 1 the capacity would be one-half the capacity of the two drives. 3. Click OK to include the full disk in the partition (the default). In the following example, Disk 1 has been partitioned and Disk Administrator assigned a temporary drive letter to the disk array. HP NetServer Installation Guide 32