HP LH4r HP Netserver LXr 8000 RS12/FC Config Guide for Windows NT4.0 Clusters - Page 2

SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: HP NetServer LXr 8000 400/450, 500/550 MHz 2 - 4 Rel 10 or later Any size 256 MB minimum. Must be HP. 3 See Local Storage below. P8 - P7 Host Bus Adapter P8 - P2 Client LAN P7 - P1 Intra-cluster (Heartbeat) LANs P2 - Remote card (optional) Storage NOTE The Client LAN must be installed in a higher PCI slot than the Intra-cluster LAN. Local Controller Driver Cabinets (Physical drive location) Disk drives (hot swap or fixed) SCSI bus SCSI Ids May Use - Embedded SCSI, NetRAID-1Si or NetRAID-3Si in PCI slot P1, otherwise any controller listed on the HP Tested Products List. May Not Use - NetRAID-1 or NetRAID-3 2.24 SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared HP Rack Storage/12FC Host Bus Adapter Model No. of HBAs Driver SPU I/O slot RAID level Cabinet RAID arrays No. of cabinets FC Array Cards Model No. of cards/cabinet (Required) HP D8602A 1 1.12 or later P8 or P7 0, 1, 3, 5, or 0 & 1 Not more than 8 physical drives per logical array and not more than 8 LUNs are permitted per Rack Storage/12FC and Rack Storage/12 combination in a cluster. 1 D5990A 1 - Simplex (Supplied with Rack Storage/12FC.) 2 - Duplex (Additional card required in the Rack Storage/12FC.) 2