HP LH4r HP Netserver LXr 8500 Rack Storage/12FC Config Guide for Windows NT4. - Page 2

Operating System SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order M/S Certified Configuration Storage Microsoft Windows NT Server 4.0, Enterprise Edition with Service Pack SP6a or later. HP NetServer LXr 8500 400/450, 500/550, 700 MHz 2 - 8 ASPN Release 8 Any size 128 MB minimum. Must be HP. 3 required for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, PCI-1, PCI-2, SCSI A, SCSI B, PCI-3, PCI-4, PCI-5 through PCI-10 P6 - Shared Storage HBA P4 - Intra-cluster (Heartbeat) LAN P3 - Client LAN P2 - HP TopTools Control card D6028A (optional) Booted from embedded SCSI Local Controller Driver Cabinets (Physical drive location) Disk drives (hot swap or fixed) SCSI bus SCSI Ids Shared HP Rack Storage/12FC Host Bus Adapter Model No. of HBAs Driver RAID level Cabinet Model RAID arrays No. of cabinets FC Array Cards May use embedded SCSI, NetRAID-1Si or NetRAID-3Si. For embedded SCSI, use sym_hi.sys version 4.12 or later. For NetRAID-xSi, use mraidnt.sys version 2.24. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Required - D5991A HP Fibre Channel Host Bus Adapter - HP D8602A 1 Hhba5100.sys 1.12 or later 0, 1, 3, 5, 10 HP NetServer Rack Storage/12FC- D5991A Not more than 8 physical drives per logical array and not more than 8 LUNs are permitted per Rack Storage/12FC and Rack Storage/12 combination in a cluster. 1 2