HP LH4r HP Netserver LXr Pro8 30/FC Installation Guide - Page 5
Shared Storage, Shared Storage Cables Fibre Optics, Shared Storage Configurations
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Shared Storage Host Bus Adapter: Model No. of HBA Driver version SPU I/O slot Disk Array Controller: Model No. of controllers Microcode Disk Array Storage: Model No. of cabinets Controller Disk capacities: ArrayGUIde RAID levels Logical units Hot spares Power Supply RAID arrays A5246A HP Fibre Channel Adapter Kit for NT 1-2 (See Shared Storage Configurations.) 2.09.B.038.020 P6 (1st HBA) and P5 (2nd HBA) SP630/FC Storage Processor (ordered with A3661B or A3662B) 1 - 2. (See Shared Storage Configurations.) 9.45.03 or greater A3661B HP High Availability Disk Array Model 30/FC. See Shared Storage Configurations. 1 - 2. (See Shared Storage Configurations.) HP A3666A 4.2 GB Disk Module; HP A5132A 8.8 GB Disk Module; HP A5133A 17.8 GB Disk Module. Version 1.7.0 or greater 1, 1/0, 3 and 5 Logical units within each array must be numbered from 0-7. Recommend assigning logical unit numbers 8 or greater. 3 Different size or speed disks are allowed in the same disk array but are not recommended in the same logical unit. Shared Storage Cables (Fibre Optics) Short Wave Port Cables Long Wave Port Cables (Long Wave Hub only) A3583A 2 meter FC cable, A3531A 16 meter FC cable, A3735A 50 meter FC cable, A3736A 100 meter FC cable, Any cable ≤500 meters per segment that conforms to ANSI X3.230-1994 Fibre Channel Standards Specification (FC-PH) rev 4.3. Any cable ≤2 kilometers that meets ANSI X3.230-1994 Fibre Channel Standards Specification (FC-PH) rev 4.3. Shared Storage Configurations Configurations: Basic Redundant Fibre Channel Hubs: Model No. of Hubs See "Basic Configuration Cabling Diagrams with Single or Cascaded Hubs." See "Redundant Configuration Cabling Diagrams with Single or Cascaded Hubs." A3724A HP 10-port Short Wave Fibre Channel (FC) Hub A4839A HP 10-port Long Wave FC Hub Basic Configuration: 1 or 2 Redundant Configuration: 2 or 4 with 1 min. or 2. max. per FC Arbitrated Loop. 3