HP LH4r HP Netserver LXr Pro8 Surestore E Installation Guide - Page 4
Local Storage
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SPU Model Clock speed No. of CPUs BIOS CPU cache RAM No. of power supplies Local storage I/O slots: LANs LAN connection NIC: Model Driver No. of NICs SPU I\O slot Local Storage Physical drive location Disk drives Controller SCSI bus HP NetServer LXr Pro8 200 MHz. 2-8 (at least 2 are required for each node; increment of 2) 1.03 or later 1 MB 256 MB minimum. Must be HP. 4 Internal or external, using any controller. Must use HP disks. See Local Storage below. P5-P7 - Shared storage HBAs. See Shared Storage. P4 - Intra-cluster LAN P3 - Client LAN All others - Any other plug-in cards. Intra-cluster LAN HP D5954A crossover cable or any equivalent only The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. HP D5013A (10/100TX PCI) (or HP J3171A) 2.24.00.0000 or later 1 P4 Client LAN Any LAN Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Any driver If the NIC used is the same as the Intra-cluster LAN, then the Client LAN must use the same driver as the Intra-cluster LAN. 1 minimum P3 SPU internal drive bays, HP external drive cabinet (e.g., HP Rack Storage/8), or any combination. Must be HP. SPU embedded controller or any controller (any number, manufacturer or driver) in any available I/O slot (see SPU I/O slots above). Any HP cables that meet SCSI specifications and any SCSI bus speed. 2