HP LH4r HP Netserver Ultra3 SCSI HBA Guide - Page 63
Option, Values, Default, Description
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Option multlun_targets= slot= verbose= Values 0-FFFF 0-xxxxb yes, no Default FFFF 0 no Description A bit mask to enable LUNs on selected targets. By default, LUNs on all targets are enabled. This bit mask is entered in hex (see "Bit Mask Options" on page 58). Defines a physical slot number for the host adapter. If 0 is specified, or if this option is not specified, then the driver loads for all Ultra3 host adapters. Displays host adapter configuration information at load time. a.Many multiple-LUN and removable-media devices are changers or magazines. Some of these are only supported by the driver through an ASPI driver provided by the hardware vendor. b.The values can vary and are dependent on the system configuration. 57
57
multlun_targets=
0-FFFF
FFFF
A bit mask to enable LUNs on
selected targets. By default,
LUNs on all targets are enabled.
This bit mask is entered in hex
(see “Bit Mask Options” on
page 58).
slot=
0-xxxx
b
0
Defines a physical slot number
for the host adapter. If 0 is
specified, or if this option is not
specified, then the driver loads
for all Ultra3 host adapters.
verbose=
yes, no
no
Displays host adapter
configuration information at load
time.
a.Many multiple-LUN and removable-media devices are changers or magazines. Some of these are only
supported by the driver through an ASPI driver provided by the hardware vendor.
b.The values can vary and are dependent on the system configuration.
Option
Values
Default
Description