HP LH4r netserver lx & lxe surestore e configuration guide — - Page 3

Shared Storage Host Bus Adapter Model No. of HBA Driver SPU I/O slot SCSI ID Disk Array Controller Model No. of controllers Firmware RAID level (internal) Logical disks Hot spare SCSI ID Disk Array Storage Model No. of cabinets Disk modules: Power supply SureStore E Manager Cabling Terminator HP A5252B Wide Differential SCSI Adapter. 1-3 per NetServer. "Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller" driver in NT 4.0 SP3 or later P6 (1st HBA, P5 (2nd HBA), P4 (3rd HBA) 7 HP A3706A 96MB Controller with SureStore E 12H 2 per SureStore E 12H HP32 or later. 1/0 and 5 Logical units within each array must be numbered from 0-7. Active Hot Spare. 0-6 or 8-15 HP A3700AB SureStore E 12H Disk Array (Option ASJ) 1-6 with a maximum of 2 SureStore E 12Hs per SCSI bus. HP A3702A 4.2 GB Disk Module; HP A3703A 9.1 GB Disk Module; HP A3710A 18.2 GB Disk Module. 3 1.01 or later. HP C2981A 0.5 meter Ultra-flexible SCSI Cable; HP C2911A 0.9 meter 68-pin HD Male to 68-pin HD Male Cable; HP C2924A 2.5 meter 68-pin HD Male to 68-pin HD Male Cable; HP C2925A 10 meter 68-pin HD Male to 68-pin HD Male Cable. Maximum 25 meters per SCSI bus. HP C2905A Wide Differential SCSI Terminator. Shared Storage Cabling This part of the guide defines the allowable cabling configurations for HP LX Pro and LXe Pro NetServer clusters using the HP SureStore E 12H Disk Array. Only these cabling configurations and cables are supported. These diagrams show single and daisy-chained configurations. 3