HP LH6000r HP Netserver LH 3000 FC Config Guide for Windows 2000 Advanced Ser - Page 4

HP Rack Storage/12 Number of cabinets: Model Status SCSI ID Disk SCSI IDs Disk drives: Cables LANs LAN connection NIC: Model Driver No. of NICs Optional 1 - 2 HP Rack Storage/12 - D5989B plus two D6025B SCSI cards for each cabinet 5 (fixed) 0 - 3, 8 - 15 (fixed) Same as HP Rack Storage/12FC Any HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or any equivalent. The intra-cluster LAN may only be used for cluster node communication via a crossover cable or VLAN. It may not be used for client communication. Client LAN Any LAN Embedded NIC Hptxnt5.sys 4.01.67 (Windows 2000 A.S. CD) or later For SPOFless, use hptxnt5.sys version 4.2.27.0 (Navigator L.18.04.5) or later. 1 Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. For SPOFless, use D5013A/or B. The vendor supported driver. NOTE If the NIC used is the same type as the embedded NIC (D5013A/B), then the Client LAN NIC must use the same driver as the Intra-cluster NIC. 1 minimum For SPOFless, 2 NICs configured as a fault tolerant team are recommended. Shared Storage Cabling This part of the guide defines the cabling configurations for clusters using the HP NetServer LH 3000 and HP Rack Storage/12FC. Only these cabling configurations and these cables are supported. 4