HP LTE Notebook PC 5300 LTE 5000 Family of Personal Computers Maintenance and - Page 53

Graphics 7. Follow the instructions on the screen to cycle through the screens, to return to the list and choose another item, or to print the information. Chapter 2.6 Diagnostic Error Codes Diagnostic error codes occur if the system recognizes a problem while running the Compaq Diagnostic program. These error codes help identify possibly defective subassemblies. Tables 2-4 through 2-16 list possible error codes, a description of the error condition, and the action required to resolve the error condition. IMPORTANT: Retest the system after completing each step. If the problem has been resolved, do not proceed with the remaining steps. For assistance in the removal and replacement of a particular subassembly, see Chapter 5, "Removal and Replacement Procedures." Table 2-4. Processor Test Error Codes Error Code Description Recommended Action 101 - xx CPU test failed Replace the processor board and retest. 102 - xx Coprocessor or 1. Run the Configuration and Weitek Error Diagnostics Utilities. 2. Replace the processor board and retest. 103 - xx DMA page registers Replace the system board and retest. test failed 104 - xx Interrupt controller master test failed 105 - xx Port 61 error 106 - xx Keyboard controller self-test failed 107 - xx CMOS RAM test failed 108 - xx CMOS interrupt test failed 109 - xx CMOS clock test failed