HP LTE Notebook PC 5380 LTE 5000 Family of Personal Computers Maintenance and - Page 166
NOTE: At reassembly, make certain that the spring on the battery release
View all HP LTE Notebook PC 5380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
3. The release holder, spring, and latch are installed as an assembly. Lift out the release holder [3] (Figure 5-42). The battery release [2] is attached to the release holder with its spring [4]. Reverse the above procedure to install the battery release assembly. Use the locating pins adjacent to each mounting hole to locate the release holder properly. NOTE: At reassembly, make certain that the spring on the battery release is not trapped between the release holder and side plastic. The spring should be below the holder (Figure 5-43).
3. The release holder, spring, and latch are installed as an assembly.
Lift out the release holder [3] (Figure 5-42). The battery release [2]
is attached to the release holder with its spring [4].
Reverse the above procedure to install the battery release assembly. Use
the locating pins adjacent to each mounting hole to locate the release
holder properly.
NOTE: At reassembly, make certain that the spring on the battery release
is not trapped between the release holder and side plastic. The
spring should be below the holder (Figure 5-43).