HP LaserJet 5000 Service Manual - Page 253
Troubleshooting, Fuser Connectors, x FUSER ERROR
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Explanation Log Message Recommended Action 50.x FUSER ERROR A Fuser error has 1. Turn the printer off for a occurred. minimum of 20 minutes to X Description clear the error. 1 Low Fuser temperature. 2. Reseat the Fuser. 2 Fuser warm up service. 3. Turn the power off and 3 High Fuser temperature. remove the Fuser. Check 4 Faulty Fuser. continuity between 5 Inconsistent Fuser. connectors J1307-1 and J1307-2. If there is no continuity, replace the Fuser. 4. Check continuity between connectors J1308-3 and J1308-1 with the Fuser removed. If there is no continuity, replace the Fuser. Figure 7-3 Fuser Connectors 7-32 Troubleshooting EN
7-32
Troubleshooting
EN
50.x FUSER ERROR
A Fuser error has
occurred.
X Description
1 Low Fuser temperature.
2 Fuser warm up service.
3 High Fuser temperature.
4 Faulty Fuser.
5 Inconsistent Fuser.
1. Turn the printer off for a
minimum of 20 minutes to
clear the error.
2. Reseat the Fuser.
3. Turn the power off and
remove the Fuser. Check
continuity between
connectors J1307-1 and
J1307-2. If there is no
continuity, replace the
Fuser.
4. Check continuity
between connectors
J1308-3 and J1308-1
with the Fuser removed.
If there is no continuity,
replace the Fuser.
Figure 7-3
Fuser Connectors
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event
Log
Message
Explanation
Recommended
Action