HP LaserJet Enterprise flow MFP M830 Warranty and Legal Guide - Page 32

Physical specifications Table 2-1 Physical specifications, with toner cartridge Product Height Depth M830z 1203 mm (47.4 in) 761 mm (30 in) Width 1103 mm (43.4 in) Weight 136 kg (300 lb) Table 2-2 Product dimensions with all doors, trays, and document feeder fully opened Product Height Depth M830z 1593 mm (62.7 in) 1196 mm (47.1 in) Width 1363 mm (53.7 in) Table 2-3 Accessory specifications Product Height Stapler/stacker 1093 mm (43 in) Stapler/stacker with 1093 mm (43 in) hole punch Booklet maker 1093 mm (43 in) Depth 783 mm (30.8 in) 783 mm (30.8 in) 783 mm (30.8 in) Width 674 mm (26.5 in) 674 mm (26.5 in) 674 mm (26.5 in) Weight 68 kg (150 lb) 73 kg (161 lb) 87 kg (192 lb) Table 2-4 Accessory dimensions with all doors and trays fully opened Product Height Depth Stapler/stacker 1093 mm (43 in) 783 mm (30.8 in) Stapler/stacker with hole punch 1093 mm (43 in) 783 mm (30.8 in) Booklet maker 1093 mm (43 in) 783 mm (30.8 in) Width 1094 mm (43.1 in) 1094 mm (43.1 in) 1094 mm (43.1 in) Power consumption, electrical specifications, and acoustic emissions See www.hp.com/support/ljflowMFPM830 for current information. CAUTION: Power requirements are based on the country/region where the product is sold. Do not convert operating voltages. This will damage the product and void the product warranty. Environmental specifications Table 2-5 Operating-environment specifications Environment Recommended Temperature 17° to 25°C (62.6° to 77°F) Relative humidity 30% to 70% relative humidity (RH) Altitude Not applicable Allowed 15° to 30°C (59° to 86°F) 10% to 80% RH 0 to 3048 m (0 to 10,000 ft) 24 Chapter 2 Product specifications ENWW